Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Burien Homeowners
A broken garage door stops your day. The car is trapped, the house is open, and the noise it made on the way down told you something is genuinely wrong. We repair garage doors in Burien, and we handle the three things that actually fail: the door itself, the opener, and the springs. Our technicians have up to 15 years of experience, so a snapped spring or a door hanging off its tracks is familiar ground rather than a puzzle. We offer same-day service when you call early, free estimates, and upfront pricing. Reach us at (877) 542-9430.
What Our Garage Door Repair Service Includes
We keep our scope narrow on purpose. Every technician works on doors, openers and springs, not a broad menu of home repairs. That focus is why we can usually tell what’s wrong from across the driveway before we’ve touched anything.
Panel Replacement
A single dented or cracked section is the most common cosmetic failure we see in Burien, usually after something backs into the door or a basketball finds the bottom panel. You need panel replacement when the damage is isolated and the rest of the door still runs true, because replacing one section costs far less than a whole door. We match the section to your existing door profile and color as closely as the manufacturer allows, replace the damaged panel, and check that the door still balances afterward. If the panel is beyond saving but the frame and hardware are sound, we’ll say so.

Spring Repair
A torsion spring above the door or an extension spring running along the track carries the entire weight of the door, and when one breaks you hear it. You need spring repair the moment the door becomes too heavy to lift by hand or won’t stay up at all. This is high-tension work, and it’s the part of the trade most generalists decline, so we handle it as a core service with technicians trained specifically for it. Never try to loosen or remove a spring yourself – the stored tension can cause serious injury. One spring typically runs $180 – $340, and because springs are usually replaced as a matched pair, a pair costs about twice that.

Cable Repair
The cables are what actually pull the door up the tracks, wound on drums at each end of the torsion shaft. You need cable repair when a cable frays, snaps, or slips off the drum, which usually leaves the door crooked or stuck halfway. A damaged cable is dangerous because the door can drop suddenly on the side that lost tension. We replace both cables as a set when one fails, since a matched pair wears at the same rate, and we check the drums and the bottom brackets while we’re in there.

Track Realignment
The vertical and horizontal tracks guide the door and hold it square, and they bend when something strikes them or when a roller jumps out. You need realignment when the door binds, scrapes, or pulls away from one side as it travels. We straighten or replace the affected sections, reset the roller spacing, and confirm the door runs clean through its whole cycle. A bent track left alone will chew through rollers and eventually warp the panels.
Roller Replacement
Rollers are the small wheels that ride inside the track, and they’re the quietest part of the system until they aren’t. You need new rollers when the door gets noisy, shudders on the way up, or you can see flat spots and worn bearings on the wheels. Steel rollers wear faster than nylon in most residential setups, and a full set is one of the cheapest fixes on the door. We replace the whole set rather than one or two, because mixing new and worn rollers puts uneven load on the tracks.
Sensor Calibration
The safety sensors sit at the bottom of the tracks and reverse the door if anything crosses the beam. You need sensor calibration when the door closes a foot and goes straight back up, or refuses to close at all with the opener light flashing. Most of the time it’s a misaligned lens, a loose wire, or sunlight hitting the receiving eye at the wrong angle. We realign the pair, check the wiring back to the motor head, and test the reversal with a physical obstruction so you know it’s working.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
Most of the residential doors and openers in Burien come from a handful of manufacturers, and we work on all of the big ones. That matters because brands fail in brand-specific ways. LiftMaster and Chamberlain openers share a lot of internal architecture, so a logic board fault or a travel-limit drift shows up the same way on both, and we recognize the pattern fast. Genie units have their own quirks around the force settings and the wall console wiring, and Raynor doors use panel and hardware profiles that need the right replacement match rather than a generic part.
We’re repair-only. We don’t sell new doors, so there’s no reason for us to steer you toward a replacement you don’t need. When we look at your door, the question is what’s broken and whether it can be fixed. Whether you have a LiftMaster opener or any other make, we can help.
Signs You Need Garage Door Repair Right Now
Some failures are cosmetic and can wait a few days. Others mean you should stop using the door and call. Here’s how to tell the difference.
- A loud bang from the garage and a door that won’t lift. That’s almost always a broken torsion spring. The door is now dead weight, and forcing the opener to lift it will burn out the motor or snap a cable.
- The door comes down crooked or stops halfway. A door traveling unevenly usually means a snapped cable or a roller off the track. Running it further can drop one side of the door and damage the panels.
- The opener runs but the door doesn’t move. You’ll hear the motor spin with no travel, which points to a stripped gear, a broken coupler, or a disconnected trolley. It’s a repair, not a replacement, in most cases.
- The door reverses before it touches the floor. That’s a safety sensor or a travel-limit problem. Until it’s fixed, the door won’t close reliably, and the safety reversal is exactly what protects anyone standing underneath.
- Grinding, screeching, or a heavy shudder. Worn rollers, dry hinges, or a track out of alignment. Left alone, these wear the moving parts faster and put strain on the opener.
Our Garage Door Repair Process – Step by Step
- 1
We ask what happened on the phone. The sound the door made, whether the opener still runs, and which brand you have all narrow the diagnosis before we arrive. It also lets us tell you whether to stop using the door immediately.
- 2
We inspect the whole system, not just the obvious part. Springs, cables, drums, rollers, tracks, hinges, and the opener’s force and travel settings. A snapped spring often comes with a stretched cable, and a bent track is usually the reason a roller failed.
- 3
We quote before we touch anything. You get a written price for the repair we recommend, agreed before any work starts. If we find a second issue while we’re in there, we show you and quote it separately so there are no surprises on the invoice.
- 4
We do the repair with the door secured. High-tension spring work gets the door clamped and the tension wound down properly before anything is removed. We use the right winding bars and check the balance by hand once the new parts are in.
- 5
We test the full cycle and the safety reversal. The door goes up and down several times, the sensors get tested with an obstruction, and the opener’s force settings are adjusted to the new spring tension. You see it working before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Burien?
Garage door repair in Burien typically runs $150 – $600, depending on what failed and how many parts are involved. A typical spring repair runs $180 – $340 for one spring, with a matched pair costing about twice that. Cable repair runs $130 – $250, track realignment $120 – $240, roller replacement $110 – $220, panel replacement $250 – $500, and opener repair $120 – $320. Those are estimated ranges for the work itself, and the written estimate you get on site sets the final price.
What moves the number: the brand and age of the hardware, whether the door is a single or double car width, how many parts failed together, and whether the tracks need straightening or replacing. A door that’s been run on a broken spring for a week often needs cables too, which is why we inspect before quoting.
The way to avoid overpaying is to get the diagnosis and the price in writing before work starts. Our estimates are free, and we’ll tell you plainly if a repair isn’t worth doing. Here’s what’s included:
- A full inspection of springs, cables, tracks, rollers, and the opener
- A written, itemized price agreed before any work begins
- The repair itself, with the door tested through a full cycle afterward
Garage Door Repair Near Burien – Our Service Area
We cover Burien and the surrounding communities, including White Center, SeaTac, Tukwila, Bryn Mawr-Skyway, Des Moines, and Renton, plus Vashon, Mercer Island, and Kent. Response times depend on where you are and how busy the day is, but we aim for same-day service on repair calls when you reach us early. If you’re in a neighboring city, see our garage door repair page or call and we’ll confirm timing for your address. For the full picture of what we do, start at Burien Garage Door Repair Pros.
Serving Burien, WA – Our Local Coverage Area
We serve Burien and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Burien
Garage door repair is fixing the parts of an existing door system that have failed, rather than replacing the door. That covers the springs, cables, rollers, tracks, panels, and the opener that drives it. We diagnose what’s actually broken and repair that component, which is almost always cheaper than a new door. If a repair genuinely isn’t viable, we’ll tell you, but we don’t sell doors, so there’s no pitch waiting at the end.
Most repairs take one to two hours on site, and simple jobs like a sensor realignment or a roller set can be under an hour. Spring and cable replacements take longer because the tension has to be wound down and the door rebalanced safely. Panel replacement depends on whether we have to order the section to match your door profile. We’ll give you a realistic time estimate when we quote.
Most garage door repairs in Burien fall between $150 and $600, with the exact figure depending on the failed part. Spring repair runs $180 – $340 for one spring, cable repair $130 – $250, and opener repair $120 – $320. You’ll get a written price before any work starts. Call (877) 542-9430 for an exact quote – estimates are free.
Yes, we repair LiftMaster and Chamberlain openers along with Genie, Raynor, Craftsman, Clopay, Amarr, and Wayne Dalton equipment. Those brands cover the large majority of residential installations in the area, so there’s a good chance we’ve worked on your exact model before. We diagnose by how that brand typically fails, rather than swapping parts and hoping.
Often yes, especially if you call early in the day. A door stuck open is a security problem, so we treat it as a priority and offer same-day service on repair calls where the schedule allows. If we can’t get to you today, we’ll give you an honest window and tell you how to secure the door in the meantime. Call (877) 542-9430 and we’ll check availability.
Yes, we stand behind the work and the parts we install. If something we replaced fails again, call us and we’ll come back out to look at it. The specifics depend on the part, so we’ll explain the coverage on your particular repair when we give you the written estimate. Parts carry their own manufacturer warranty on top of that.
Clear the floor in front of and underneath the door so the technician has room to work, and move anything stored against the tracks. If you can, note roughly when the problem started and whether the opener still runs, since that speeds up the diagnosis. Keep pets and kids out of the garage while the door is being tested. And if a spring has snapped, stop using the door entirely until we arrive.
Schedule Your Garage Door Repair Service in Burien Today
If your door is stuck, noisy, or refusing to close, we can take a look. Call (877) 542-9430 for a free estimate and a written price agreed before any work starts. We offer same-day service on repair calls when you reach us early, and our technicians have up to 15 years of experience with the brands you already own. No obligation, no replacement pitch.
For more on our related services, see garage door repair, our coverage in garage door repair for White Center, and our sister services for garage door opener repair and garage door spring repair.
Written by the team at Burien Garage Door Repair Pros.